How To Drain Bullfrog Spa

Admin
0
How To Drain Bullfrog Spa

Maintaining a Bullfrog Spa is a relatively straightforward process, with draining and refilling the tub being an important part of proper care. In order to keep your spa in tip-top condition and ensure maximum safety for you and your family, it's important to know how to properly drain and refill a Bullfrog Spa. Read on to learn the steps necessary to drain and refill your Bullfrog Spa.

Steps to Drain a Bullfrog Spa

  • Turn off the power to the spa.
  • Open the drain valve located on the bottom of the spa.
  • Connect a garden hose to the drain valve to direct the draining water to a safe place.
  • Lift the skimmer lid and remove the filter basket.
  • Allow the water to drain completely from the spa.
  • After the water is drained, disconnect the garden hose from the drain valve and close the valve.

Steps to Refill a Bullfrog Spa

  • Turn off the power to the spa.
  • Open the shut-off valves located in the front of the spa.
  • Attach a garden hose to the spigot located in the front of the spa.
  • Turn on the water and allow the spa to fill with water.
  • Check the water level in the spa and adjust as needed.
  • Once the spa is full, turn off the water and disconnect the garden hose.
  • Turn on the power to the spa.
  • Test the pH and alkalinity levels and adjust as needed.

People Also Ask

How often should I drain my Bullfrog Spa?

It is recommended to drain and refill your Bullfrog Spa every 3 to 4 months.

How long does it take to drain a Bullfrog Spa?

It should take about 30 minutes to drain a Bullfrog Spa.

Do I need to add chemicals when I refill my Bullfrog Spa?

Yes, it is important to add the appropriate chemicals when refilling your Bullfrog Spa. This will help keep the water clean and safe for use.

What type of hose should I use to drain my Bullfrog Spa?

It is best to use a garden hose when draining your Bullfrog Spa. Make sure the hose is long enough to reach a safe location.

How do I know when my Bullfrog Spa is full?

Your Bullfrog Spa should be filled to the level of the skimmer opening. If the water is too low, simply open the shutoff valve and allow more water to enter the spa.

Draining and refilling a Bullfrog Spa is a relatively easy process and important for the maintenance of your spa. By following the steps outlined above, you can ensure that your Bullfrog Spa is in peak condition and safe for use.


Spa Drain Cap, 3/4" Barb Valve - Bullfrog Spas Shop

Spa Drain Cap, 3/4" Barb Valve - Bullfrog Spas Shop
Image by shop.bullfrogspas.com

Outdoor Leisure | Bullfrog Spas | Hot Tub Construction

Outdoor Leisure | Bullfrog Spas | Hot Tub Construction
Image by www.outdoor-leisure.net

Bullfrog Spas Products

Bullfrog Spas Products
Image by 930kmpt.com

Post a Comment

0Comments
Post a Comment (0)